miniAV®-HT High Temperature Kinematic Viscometer

For Kinematic Viscosity of Asphalt Binders, Cements and Cutbacks
AASHTO T201, ASTM D2170, ASTM D445/D446, ISO 3104/3105, IP 71

miniAV®-HT is a fully automated, single-sample, benchtop viscometer for determining the kinematic viscosity of asphalts at 60 °C and 135 °C. The Ubbelohde-style tube covers a 100-fold viscosity range at values between 0.5 mm²/s (cSt) and 10,000 mm²/s (cSt).

Common Applications

  • Asphalt binders
  • Asphalt cements
  • Asphalt cutbacks

Meets AASHTO T201, ASTM D2170 and ASTM D445 precision requirements

  • Developed specifically for asphalt kinematic viscosity testing at 60 °C and 135 °C
  • Instrument temperature range: 40 °C to 150°C
  • Viscosity range: 0.5mm²/s (cSt) to 10,000mm²/s (cSt)* in 100-fold increments (easily covering the range of 5 separate manual glass viscometers)
  • A well tested CANNON viscometer platform offers reliability and dependable support
  • Includes adjustable sample preheater and heated waste lines

Simple, automated benchtop testing

  • Automation provides an alternative to labor-intensive manual testing and reduces operator to operator variability
  • VISCPRO® PC software enables one PC to manage and control up to four instruments
  • User-configurable reports may be viewed, printed, saved and exported
  • Up to 12 determinations/hour

Compact, convenient design

  • Modular bath for easy maintenance access
  • System fits in roughly the same benchtop area as an analytical balance

Reduced maintenance and consumable costs

  • Ubbelohde-style tube reduces solvent usage and disposal costs by 50%
  • Operators physically replace tubes in minutes, eliminating the need for related service calls
  • Single-point temperature calibration allows calibration at a single relevant test temperature and avoids the need for tube recalibration at other temperatures
  • Instrument includes standard dual-solvent input

* Some upper viscosity measurements may be limited by test temperature and sample type.

** Installation outside the domestic U.S. may incur additional charges

Dimensions (W × D × H) Unit: 25.4cm × 30.5cm × 59.8cm (10.0in × 12.0 in× 23.5in)
Power Supply: 33.0cm × 39.6cm × 17.2cm (13.0in × 15.6in × 6.8in)
Waste Receiver: 33.0cm × 39.6cm × 17.2cm (13.0in × 15.6in × 6.8in)
Weight Unit: 12.5kg (27.5lb)
Power Supply: 11.0kg (24.0lb)
Waste Receiver: 6.0kg (13.0lb)
Shipping dimensions (W × D × H) 74.0cm × 64.0cm × 92.0cm (29.0in × 25.0in × 36.0in)
Shipping weight (with all items) 64.0kg (140.0lb)
Maximum thoughput 12 tests per hour
Automated sample capacity 1
Viscosity range 0.5mm2/s (cSt) to 10,000mm2/s (cSt) in 100-fold increments (depending on viscometer tube selection).
Timing resolution 0.01s (timing accuracy to ± 0.001s)
Temperature range and accuracy 40°C to 100°C, ± 0.01°C
100 °C to 150°C, ± 0.02°C
* Alternate bath medium may be required for temperatures below 60 °C or above 135 °C
Minimum sample/solvent volume 5mL sample/15mL solvent per test (as little as 3mL with fast run tubes)
Operating conditions 15°C to 30°C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2
Electrical specifications 100Vac, 50/60Hz; 115Vac, 50/60Hz; 230Vac, 50/60Hz; 1200watts power consumption
Compliance CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900Vdc, 60sec.); ROHS
Data output RS-232 via DB-9 connector

 

Link to Downloads page for Software and Firmware 

miniAV®-HT hight Temperature Kinematic Viscometer comes with an external power supply, temperature control unit and waste receiver assembly. One viscometer tube, one set of oil viscosity standards, a case of glass vials, a high precision digital thermometer with probe, VISCPRO® data storage/management software, a one year warranty and professional installation/training (within the domestic U.S.) are also included. Specify desired factory installed viscometer tubes when ordering. Computer sold separately. Description  Part #
100 Vac, 50/60 Hz 9725-B45
115 Vac, 50/60 Hz 9725-B50
230 Vac, 50/60 Hz 9725-B55

 

Kit, User Spare Parts, miniAV, AV-X, QV-X (for one year)

$2,735.71


Vial, Glass, 20ml 40/case - 27x57mm Screw Thread w/o Caps

$65.34


S60 Viscosity Standard 0.5 L

$65.89


N140 Viscosity Standard 0.5 L

$65.89


S200 Viscosity Standard 0.5 L

$65.89


S600 Viscosity Standard 0.5 L

$65.89


S2000 Viscosity Standard 0.5 L

$65.89


S8000 Viscosity Standard 0.5 L

$65.89


S30000 Viscosity Standard 0.5 L

$65.89


General Purpose Viscosity Standards

USB Serial Adaptor

$80.90


SILICONE FLUID 20 CST 1000 ML PACKAGED FOR MINI-CAV

$153.86



We are using Cookies to improve your user experience. If you want to learn more about cookies and how we use them, please visit our cookie page. Further browsing of this site indicates that you accept our cookie policy.