SPS Solution Preparation System

ASTM D789, ASTM D1243, ASTM D1601, ASTM D1795, ASTM D2857, ASTM D3591, ASTM D4243, ASTM D4603, ASTM D5226, ASTM D5336, ISO 307, ISO 1628-1, ISO 1628-3, ISO 1628-5, ISO 5351

Features & Benefits

The semi-automated CANNON® SPS Solution Preparation System uses gravimetric (weight-to-weight) rather than volumetric methodology to prepare highly accurate (± 0.02% of target) polymer solutions for relative viscosity measurement on CANNON automated polymer viscometers. Gravimetric preparation eliminates errors associated with variation in solvent density as well as manual weight/volume measurements.

  • Viscosity of polyamides
  • Dilute solution viscosity of ethylene polymers
  • Intrinsic visosity of cellulose
  • Inherent viscosity of PET
  • Solution viscosities of polyamide

  • All-in-one automated Solution Prep system when coupled with an automated viscometer (such as the CANNON miniPV-X or PolyVISC) the SPS provides a complete polymer analysis system. Includes:
    • a titrator for dispensing solvent
    • a scale
    • proprietary software for facilitating and managing solution preparation
    • when coupled with an automated viscometer (such as the CANNON miniPV-X or PolyVISC) the SPS provides a complete polymer analysis system
  • Reduced variability with accurate results independent of temperature fluctuations 
  • Concentration accuracy ± 0.02% for most samples over 100 mL
  • Gravimetric or weight-based sample preparation eliminates errors associated with volumetric methods resulting from:
    • changes in solvent density due to temperature fluctuation
    • laborious manual weight and volume measurements
  • Convenient user configuration and storage of multiple sample/solvent recipes
  • Software directs user to add solute, calculates volume and automatically adds solvent to the sample container
  • Concentration is automatically calculated and stored along with other sample information for future reference
  • Prepares solutions according to weight-to-weight, weight-to-volume and dilution-to-volume methodology
  • Solution prep time is apx. 2 minutes for most samples
  • Eliminates need for expensive and delicate glassware

Dimensions (W × D × H) Burette: 13.5 cm × 20.5 cm × 31.0 cm (5.3 in × 8.1 in × 12.2 in)
Balance: 26.3 cm × 45.3 cm × 32.2 cm (10.4 in × 17.8 in × 12.7 in)
Weight Burette: 2 kg (4.4 lb)
Balance: 9.1 kg (20.1 lb)
Shipping dimensions (W × D × H) Burette: 30.5 cm × 30.5 cm × 40.6 cm (12 in × 12 in × 16 in)
Balance: 53.3 cm × 38.1 cm × 43.2 cm (21 in × 15 in × 17 in)
Shipping weight (with all items) 17.2 kg (38 lb)
Throughput 2 minutes (per 50 mL solvent)
Flow Rate o mL/min to 400 mL/min
Operating conditions 15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II, Pollution Degree 2
Electrical specifications 120 Vac, 50/60 Hz;240 Vac, 50/60 Hz; 1800 watts power consumption
Compliance CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS

 

Link to Downloads page for Software and Firmware 

We are using Cookies to improve your user experience. If you want to learn more about cookies and how we use them, please visit our cookie page. Further browsing of this site indicates that you accept our cookie policy.