miniAV®-X Single-Bath Kinematic Viscometer

For Kinematic Viscosity of Transparent and Opaque Liquids
ASTM D445/D446, ISO 3104/3105, IP 71

miniAV®-X is a fully automated, single-bath, benchtop viscometer with a 10-position sample handler for unattended D445 processing. The Ubbelohde-style tube covers a 100-fold viscosity range between 0.5 mm²/s (cSt) and 6,000 mm²/s (cSt) from 15 °C to 100 °C (with available TE cooler).

Common Applications

  • Formulated oil analysis
  • Hydraulic oil analysis
  • Additive analysis
  • Marine fuel testing
  • Base stock analysis
  • Light and heavy fuel testing
  • Waxes/paraffin
  • Crude oil testing
  • Glycols

miniAV-X

D445 precision in a compact, robust design

  • Temperature range: ambient to 100°C (15°C to 100°C with available TE cooler)
  • Viscosity range: 0.5mm²/s(cSt) to 6,000mm²/s(cSt)* in 100-fold increments (easily covering the range of 5 separate glass viscometers)
  • Fits in roughly the same benchtop area as an analytical balance
  • Optional Peltier cooling is environmentally friendly and requires no external refrigeration
  • A well tested CANNON viscometer platform offers reliability and dependable support

Fully automated benchtop testing

  • A fully accessible 10-position sample handler ensures reliable, unattended processing of up to 12 determinations/hour
  • Automation provides an alternative to labor-intensive manual testing and reduces operator to operator variability
  • VISCPRO® PC software enables one PC to manage and control up to four instruments
  • User-configurable reports may be viewed, printed, saved and exported

Reduced consumable costs

  • ASTM D 446/ISO 3105 Ubbelohde-style tube reduces solvent usage and disposal costs by 50%
  • Automated vial washing & drying enables reuse and reduces vial consumption

Simplified maintenance & test versatility

  • Modular bath for easy maintenance access
  • Operators physically replace tubes in minutes, eliminating the need for related service calls
  • Single-point temperature calibration avoids tube recalibration costs and maximizes flexibility
  • Instrument includes standard dual solvent input

*Some upper viscosity measurements may be limited by test temperature and sample type. Fast run (10-fold range) tubes are also available.

Dimensions (W × D × H) Unit: 25.4cm × 43.7cm × 52.6cm (10.0in × 17.2in × 20.7in)
Power Supply: 33.0cm × 39.6cm × 17.2cm (13.0in × 15.6in × 6.8in)
Waste Receiver: 33.0cm × 39.6cm × 17.2cm (13.0in × 15.6in × 6.8in)
Weight Unit: 18.0kg (40.0lb)
Power Supply: 11.0kg (24.0lb)
Waste Receiver: 6.0kg (13.0lb)
Shipping dimensions (W × D × H) 73.7cm × 63.5cm × 94.0cm (29.0in × 25.0in × 37.0in)
Shipping weight (with all items) 63.5kg (140.0lb)
Maximum thoughput 12 tests per hour
Automated sample capacity 10
Viscosity range 0.5mm²/s (cSt) to 10,000mm²/s (cSt) in 100-fold increments (depending on viscometer tube selection). Fast run tubes are also available.
Timing resolution 0.01s (timing accuracy to ± 0.001s)
Temperature range and accuracy 20°C to 100°C, ± 0.01°C (temperatures within 5°C of ambient and below require bath cooling)
Down to 15°C, ± 0.03°C (temperatures within 5°C of ambient and below require bath cooling)
Minimum sample/solvent volume 5mL sample/15mL solvent per test (as little as 3mL with fast run tubes)
Operating conditions 15°C to 30°C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2
Electrical specifications 100Vac, 50/60Hz; 115Vac, 50/60Hz; 230Vac, 50/60Hz; 1000watts power consumption
Compliance CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900Vdc, 60sec.); ROHS
Additional standard features Internal heated waste drain lines, dual solvent input
Data output RS-232 and RS-485

 

Link to Downloads page for Software and Firmware 

miniAV®-X Single-Bath Kinematic Viscometer comes with a 10-position sample carousel, external power supply and waste receiver assembly. One viscometer tube, one set of oil viscosity standards, a case of glass vials, a high precision digital thermometer with probe, VISCPRO® data storage/management software, a one year warranty and professional installation/training (within the domestic U.S.) are also included. Specify desired factory installed options and viscometer tubes when ordering. Computer sold separately. Description  Part #
100Vac, 50/60Hz 9725-A87
115Vac, 50/60Hz 9725-A85
230Vac, 50/60Hz 9725-A86

 

Options
Factory installed options (see NOTE) must be specified when ordering. Part numbers are listed below for field installable options. Field installation must be performed by factory-trained personnel (unless indicated by an asterisk *). Field installation costs are not included.
Note: Additional temperature calibration (for each temperature beyond the first) is also available at the time of ordering.

 

Description Part #
TE bath cooling (external)* 81.2216
External heated waste drain line w/ external power supply* 81.3115

 

Pedestal Base

$1,686.11


Assy, Carousel mini-X

$1,350.01


Kit, User Spare Parts, miniAV, AV-X, QV-X (for one year)

$2,735.71


Vial, Glass, 20ml 40/case - 27x57mm Screw Thread w/o Caps

$65.34


SILICONE FLUID 10 CST 1000 ML PACKAGED FOR MINI-CAV

$153.86


USB Serial Adaptor

$80.90



We are using Cookies to improve your user experience. If you want to learn more about cookies and how we use them, please visit our cookie page. Further browsing of this site indicates that you accept our cookie policy.