CAV® 4.2 Dual-Bath Kinematic Viscometer

For Kinematic Viscosity of Transparent and Opaque Liquids
ASTM D445/D446, ISO 3104/3105, IP 71

CAV® 4.2 is a fully automated, dual-bath, benchtop viscometer with two 14-position sample handlers for unattended D445 processing. Each of the two Ubbelohde-style tubes (one per bath) covers a 100-fold viscosity range between 0.5 mm²/s (cSt) and 10,000 mm²/s (cSt) from 15 °C to 150 °C (with available options).

Common Applications

  • Formulated oil analysis
  • Hydraulic oil analysis
  • Additive analysis
  • Marine fuel testing
  • Base stock analysis
  • Light and heavy fuel testing
  • Waxes/paraffin
  • Crude oil testing
  • Glycols

CAV 4.2 Video

CAV 4.2 Video

D445 precision in a modern, dependable design

  • Temperature range: ambient to 100°C (15°C to 150°C with available bath options)
  • Viscosity range: 0.5mm²/s (cSt) to 10,000mm²/s (cSt)* in 100-fold increments (easily covering the range of 5 separate manual glass viscometers)
  • Dual, independent modular baths enable simultaneous testing at two different temperatures
  • Two fully accessible, 14-position sample handlers ensure reliable, unattended processing of up to 24 determinations per hour
  • Automation provides an alternative to labor-intensive manual testing and reduces operator to operator variability
  • A well tested CANNON viscometer platform offers reliability and dependable support

Compact & self-contained with flexible configuration

  • Simple, out-of-the-box installation
  • 35% smaller footprint conserves lab space
  • Optional, environmentally friendly Peltier cooling requires no external refrigeration
  • An onboard computer enables preprogrammed test parameters to be run without an external PC
  • VISCPRO® PC software enables programming of user-defined test methods and permits one PC to manage and control up to four instruments
  • User-configurable reports may be viewed, printed, saved and exported

Reduced consumable costs

  • ASTM D445/ISO 3105 Ubbelohde-style tubes reduce solvent usage and disposal costs by 50%
  • Automated vial washing and drying enables reuse and reduces vial consumption

Simplified maintenance and test versatility

  • Modular bath for easy maintenance access
  • Operators physically replace tubes in minutes, eliminating the need for related service calls
  • Single-point temperature calibration avoids tube recalibration costs and maximizes flexibility
  • Colored status indicator bath lights provide a simple remote indication of operational status
  • Multiple predefined/user-defined test methods can be run within the same sample tray
  • (Optional) High throughput, selective zone heating preheats individual samples to any temperature from ambient to 100°C
  • Instrument includes standard dual-solvent input

* Some upper viscosity measurements may be limited by test temperature and sample type. Fast run (10-fold range) tubes are also available.

 

Link to Downloads page for Software and Firmware 

Dimensions (W × D × H) 36.0cm × 66.0cm × 72.0cm (14.3in × 26.0in × 28.5in)
Weight 63.0kg (140.0lb)
Shipping dimensions (W × D × H) 81.3cm × 53.3cm × 99.0cm (32.0in × 21.0in × 39.0in)
Shipping weight (with all items) 96.6kg (213.0lb)
Maximum thoughput 24 tests per hour
Automated sample capacity 28 positions (2 x 14 positions)
Viscosity range 0.5mm²/s(cSt) to 10,000mm²/s(cSt) in 100-fold increments (depending on viscometer tube selection). Fast run tubes are also available.
Timing resolution 0.01s (timing accuracy to ± 0.001s)
Temperature range and accuracy 20°C to 100°C, ± 0.01 °C (temperatures within 5°C of ambient and below require bath cooling)
Up to 150°C, ± 0.03°C (with high temperature bath)
Down to 15°C, ± 0.03°C (with TE cooling)
Minimum sample/solvent volume 8mL sample/15mL solvent per test (as little as 3mL with fast run tubes)
Operating conditions 15°C to 30°C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2
Electrical specifications 100Vac, 50/60Hz; 115Vac, 50/60Hz; 230Vac, 50/60Hz; 1200watts power consumption
Compliance CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS
Additional standard features Internal heated waste drain lines, dual solvent input
Data output USB

 

Link to Downloads page for Software and Firmware 

CAV® 4.2 Dual-Bath Kinematic Viscometer comes with two 14-position sample carousels, two viscometer tubes, one set of oil viscosity standards, a case of glass vials, a high precision digital thermometer with probe, VISCPRO® data storage/management software, a one year warranty and professional installation/training (within the domestic U.S.). Specify desired factory installed options and viscometer tubes when ordering. Computer sold separately. Description  Part #
100Vac, 50/60Hz, 1200watts 9725-B30
115Vac, 50/60Hz, 1200watts 9725-B35
230Vac, 50/60Hz, 1200watts 9725-B40

 

Options
Factory installed options (see NOTE) must be specified when ordering. Part numbers are listed below for field installable options. Field installation must be performed by factory-trained personnel (unless indicated by an asterisk *). Field installation costs are not included.
Note: A third solvent input, integrated high temperature baths (left or right) and additional temperature calibration (for each temperature beyond the first) are also available at the time of ordering.

 

Description Part #
Sample preheat assembly for glass vials (left/right) 68.0538/68.0540
Sample preheat assembly for metal sleeves (left/right) 68.0537/68.0539
Sample carousel safely cover* 68.0299
Integrated thermoelectric bath cooling (per bath) 68.0541
External heated waste drain lines* 68.3112
Laser printer* 93.6005
Enhanced vapor reduction (100Vac and 115/230Vac) 68.0484/68.0485

 

Vial, Polypropylene 24mm x 62 mm (1,000/pk)

$436.34


CAV 4.2 Carousel (glass vials)

$1,034.81


CAV 4.2 Carousel (metal sleeves)

$991.48


Pedestal Base

$1,686.11


CAV 4.2 Safety Cover

$1,031.00


Kit, Metal Sleeve Wax Sample

$165.05


External drain wrap heater

$382.94


Glass Vials (24 x 62 mm) (box of 144 vials)

$120.20


SILICONE FLUID 10 CST 1000 ML PACKAGED FOR MINI-CAV

$153.86


Enhanced Vapor Reduction System (100/115 VAC)

$2,480.74


Enhanced Vapor Reduction System (230 VAC)

$2,480.74


General Purpose Viscosity Standards

Extended CAV 4.2 User Spare Parts Kit

$7,601.15



We are using Cookies to improve your user experience. If you want to learn more about cookies and how we use them, please visit our cookie page. Further browsing of this site indicates that you accept our cookie policy.