Software and Firmware Downloads

CANNON suggests using Windows® 10 operating system. Any computers running Windows® XP must download the appropriate XP software in the notes section of the instrument or program. Please address all questions to customer service at 814-353-8000 or 800-676-6232.

Software

ZIP Files Version Released Notes
BBRw
1.32  9/30/2019

 Software required for running ASTM D6648 and AASHTO T313 tests using the BBR.

 For Windows® XP software, click BBRw XP.

BBRw Long Test Version
3.24    NOT INTENDED FOR PRODUCTION USE. Software for special 3 hour long test. Intended for research to collect data for extended  load and recovery cycles.
  1.20    
HTHS
2.02    
SlavTalk
1.03    
SPS
1.28    
TESC D2983 Testing
     
TESC D5133 Testing
1.1.0 4/03/2020  
TESC D8210 Testing
     
ViscPro for AV2K
1.11    
ViscPro I
1.32 (Disk rev 1) 7/30/2019  For Windows® XP software, click VISCPRO I XP.
ViscPro II
2.60.4

5/13/2020

VISCPRO must always be as up-to-date as the CAV 4.2 software. VISCPRO can be newer than the CAV 4.2 software, but if the software on the CAV 4.2 is newer, there could be some compatibility issues. Update VISCPRO to avoid issues.

For Windows® XP software, click VISCPRO II XP.

Network Setup Script for using VISCPRO II with CAV 4.2
  4/29/2016 This script can be used to automatically perform the "Set up network adapter" and "Configure firewall rules" procedures on pages 28-31 or the CAV 4.2 Operator's Manual.

 

 

VISCPRO II

 

  CAV 4.2 Package

2.60.4 1.27.1

 

E_CAV4200UI.EXE

 

   Firmware Package

1.27 2.0.1 Bath Controller Sample Handler Valve Controller
2.0.2 0.14 0.11

 

Firmware

ZIP Files Version Released Notes
Firmload for DOS
     
Firmload forWindows 
     
BBR
    Firmware for the TE-BBR 
BBR-SD
1.34 02/11/2020 Firmware for the BBR-SD
AV2K0106
1.xx   EPROM Do not use AV2K0108
AV2K0251
2.xx   EPROM
AV2K0313
3.xx   EPROM and old style valve tray
AV2K0322
3.xx   Fast Run and Normal tubes can now run in same bath
AV210105
    Latest version of the AV2100
AV220209
    Latest version of the AV2200
miniAV0112
    Must be used with VISCPRO II version 2.05.03 and earlier
miniAV0235
  04/15/2019
Must be used with VISCPRO II version 2.56.3 and newer.
Now uses % Overdraw
Fast run: Bulb 1 = 100%, Bulb 2 = 40% 
Standard Run: Bulb 1 = 50%, Bulb 2 = 10%
CAV 4.2 UI/Firmware
1.27.1 04/03/2020 Must be used with VISCPRO II version 2.60.03 and newer
USB 2.0 to Ethernet Driver
    Drivers to manually install the USB to Ethernet adapter
CCS
    CCS Series 2 DOS version
CCS122
    CCS 2050/2100 DOS version
CCSH0201
    CCS VISCPRO version (500 count encoder)
CCSH0217
    Latest CCS VISCPRO version (2000 count encoder)
CMRV0101
    Use with MRVw 1.x Windows software
MRVh0206
    Use with VISCPRO Software latest version
CT2K0104
     
MFV101
     
DPVh0202
    Requires download/low mem code version 2.00 or lower
DPVh0211
    (unchilled) Requires download/low mem code version 2.01 or higher
DPVh0212
    (chilled) Requires download/low mem code version 2.01 or higher
PlyV0216
     
TE3K0103
     
AV Sensor Code
SNSR6970    
LubeVIS

0112

   
PulpVIS
0112    
SimpleVIS
0112    
SimpleVIS II
0112    
  1.07    

 

We are using Cookies to improve your user experience. If you want to learn more about cookies and how we use them, please visit our cookie page. Further browsing of this site indicates that you accept our cookie policy.