|
The BBR Precision Calibration Kit offers the user increased confidence in the calibration of the CANNON Bending-Beam Rheometer by providing greater test measurement accuracy, precision and verification. Individual calibration certificates (NIST-traceable) are included for each component — the newly designed high-precision gage block, the precision-cut stainless steel confidence (thin) beam, the ¼"-thick compliance beam, and all weights. The calibration kit allows full use of the increased resolution available with the new microprocessor controller for the CANNON BBR and TE-BBR. The weight set permits verification of rheometer calibration per ASTM D 6648-01 methodology. A convenient, rugged carrying case protects all components of the kit. The BBR Precision Calibration Kit can be used with all CANNON BBR and TE-BBR instruments. The complete kit includes: ASTM D 6648-01 method, gage block, thin beam, thick beam, four 100-gram weights, two 2-gram weights, tweezers, and calibration certification.
BBR D 6648 Update Kit
CANNON now supplies an update kit for Bending-Beam Rheometer models purchased before December of 2001. The kit ensures compatibility with ASTM D 6648-01 by providing for verification of load and deflection values. The Update Kit includes a pair of calibrated 2-gram weights with calibration certification. The Kit also includes separate containers for each of the weights and a tweezers for handling of weights to avoid contamination.
Silicone Rubber Mold for BBR
The Silicone Rubber Mold simplifies the procedure for making asphalt beams for testing in the CANNON Bending-Beam Rheometer. Because asphalt does not adhere well to the silicone rubber, hot asphalt poured into the mold cavity can be easily released from the mold after cooling. As a result, there is almost no cleanup required, and beams are formed with very clean corners and surfaces. The Silicone Rubber Mold consists of an aluminum frame, two rubber mold inserts, a thick sheet of silicone rubber, glass plate, two thin plastic backup sheets, and two clamps.
|
|
SHRP Dynamic Shear Rheometer Accessories
DSR Temperature Probe The DSR temperature probe measures temperatures between 0°C and 80°C in the sample area of dynamic shear rheometers, such as those specified for use by SHRP. The probe consists of a tiny thermistor mounted within a thin 25 mm disk made of silicone rubber. When the probe is inserted between the plates of a dynamic shear rheometer and the probe wires are connected to an accurate ohmmeter, temperatures may be measured to an accuracy of ± 0.05°C. Supplied with a calibration certificate and instructions for use.
|
DSR Standard
CANNON Instrument Company offers DSR viscosity standard N2700000SP at 52, 58, 64, 70, & 76°C for users of Dynamic Shear Rheometers.
TE-BBR Order Information
|
Catalog #
|
Item Description
|
|
|
9728-V60
|
Complete Calibration Kit (Gage Block, Thin Beam, Thick Beam, Four 100-gram Weights, Two 2-gram Weights, Calibration Certification, ASTM D 6648-01, and Carrying Case) |
|
|
9728-V63
|
BBR D 6648 Update Kit (Set of Two 2-gram Weights, Tweezers, and Calibration Certification |
|
|
9728-V40
|
Silicone Rubber Mold for the Bending-Beam Rheometer |
|
|
9728-V95
|
DSR Temperature Probe |
|
|
9727-E42
|
N2700000SP Dynamic Shear Rheometer (DSR) Standard@52, 58, 64, 70, & 76°C |
|
|
|
