|
|
|
|
All Manual Tanaka Flash Point Testers are equipped with:
- Easy-to-clean stainless steel case.
- Electrically heated cup.
- Variable control to set temperature rise rate.
- ASTM / IP mercury thermometers.
|
 |
Tag Closed Cup Model:
1A-391 ASTM D56
| Heater |
Nichrome coil heater, 0.3kW |
| Heater Control |
Thyristor and Voltmeter |
| Ignition Source |
Gas |
| Power Requirement |
100,120,220,230,240VAC
50/60Hz, 0.3kW |
| Dimensions |
W200 x D200 x H350mm |
| Weight |
Approx. 6kg |
| Standard Accessories |
| Test Cup |
1 |
| Thermometer; ASTM 9C |
1 |
| Thermometer; ASTM 57C |
1 |
| Rubber Tubing for gas |
1 |
|
| Optional Accessories |
Wind Shield, enameled steel, folding type |
| Suggested Spares (2 Yrs) |
| Test Cup |
2 |
| Thermometer; ASTM 9C |
1 |
| Thermometer; ASTM 57C |
1 |
| Heater Coil |
1 |
| Heater Insulator Set |
1 |
| Fuse; MHS-5A (all) |
2 |
|
|
|
|
Pensky Martens Closed Cup Model:
1A-651 for ASTM D93 (A)- IP 34; ISO 2719
| Heater |
Band type heater, 0.4kW |
| Stirring Device |
AC Motor with Gear Head 90 to 120 rpm Method-A only |
| Power Requirement |
50/60Hz, 0.5kW |
| Dimensions |
W200 x D250 x H700mm |
| Weight |
Approx. 8kg |
| Standard Accessories |
| Test Cup with handle |
1 |
| Thermometer; ASTM 9C |
1 |
| Thermometer; ASTM 10C |
1 |
|
| Suggested Spares (2 Yrs) |
| Test Cup with handle |
2 |
| Thermometer; ASTM 9C |
1 |
| Thermometer; ASTM 10C |
1 |
| Band Heater |
1 |
| Fuse; MHS-5A (220V) |
2 |
| or MHS-10A (120V) |
2 |
| Fuse; MHS-5A (all) |
2 |
|
|
|
|
Cleveland Closed Cup Model:
1A-741 for ASTM D92 - IP 36; ISO 2592
| Heater |
Nichrome coil heater, 1.0kW |
| Power Requirement |
100,120,220,230,240VAC
50/60Hz, 1.0kW |
| Dimensions |
W300 x D200 x H400mm |
| Weight |
Approx. 6kg |
| Standard Accessories |
Thermometer; ASTM 11C x1 |
| Suggested Spares (2 Yrs) |
| Test Cup with handle |
2 |
| Thermometer; ASTM 11C |
1 |
| Heater Coil |
1 |
| Heater Insulator Set |
1 |
| Fuse; MHS-10A (220V) |
2 |
| or MHS-15A (120V) |
2 |
|
|
|
Manual Flash Point Testers
