Conforming Standards:
ISO 3405, ASTM D86, IP123 for distillation test of petroleum products. (groups 0,1,2,3,4)
ASTM D850 for distillation test of industrial aromatic hydrocarbons (with optional accessories)
ASTM D1078 for distillation test of volatile organic liquids (with optional accessories)
Temperature Range:
Selectable from RT to 300oC/400oC (fuel oil) or
RT to 200oC/400oC (ASTM D850, D1078)
Temperature Measurement:
Pt 100 Probe
Meniscus Detection:
By photoelectric devices with pulse motor
Distillation Rate:
Selectable from 2.0 to 9.0ml/min with 0.5 increment
Display:
Monochrome LCD (120mm x 90mm) Distillation curve and other test parameters, status, and trouble message displayed
Condenser Tube:
Brass tube(std) or stainless steel tube(opt)
Receiver Room:
Controlled at 0 to 70oC by Peltier elements
Safety Features:
Heater shuts down at the upper end of the scale (200/300/400oC). Upon detecting fire by thermofuse, warning buzzer beeps, heater shuts down, and fire containment system activates.
The fire containment system consists of a mechanical shutter and N2 gas injector.
Error Messages:
In case of detecting an error or equipment abnormality, the corresponding error message is displayed and the buzzer beeps.
Computer Output:
RS-232C, 1 channel
Utility Requirements:
100, 120, 220 or 240VAC, 1.5kW 50/60Hz,
External N2 gas supply (for fire containment system)
Dimensions & Weight:
400mmW x 520mmD x 710mmH, 55kg
Standard Accessories:
| 1 |
Distillation Flask, 125ml |
1 pc |
| 2 |
Graduated Cylinder Assy, 100ml |
1 pc |
| 3 |
Flask Support Board, 38mm ID |
1 pc |
| 4 |
Flask Support Board, 50mm ID |
1 pc |
| 5 |
Temperature Sensor for Fuel Oils |
1 pc |
| 6 |
Temperature Sensor Centering Device |
1 pc |
| 7 |
Silicon Stopper for Flask (vapor tube) |
1 pc |
| 8 |
Spare Thermofuse |
3 pcs |
| 9 |
AC Power Cord |
1 pc |
| 10 |
Instruction Manual |
1 copy |
Optional Accessories:
| 1 |
Built-in Thermal Printer and Printing Paper |
| 2 |
Temperature Sensor for ASTM D850, D1078 |
| 3 |
Flask for ASTM D850, D1078, 200ml |
| 4 |
Silicone Stopper No.6 for Temperature Sensor for 200ml Flask |
| 5 |
Flask Support Board for D850, 25mm ID |
| 6 |
Flask Support Board for D1078, 32mm ID |
| 7 |
Flask for 10% Distillation Residue, 250ml |
| 8 |
Cylinder for 10% Distillation Residue, 200ml |
| 9 |
Dry Point Sensor with Silicone Stopper |
| 10 |
Barometric Pressure Sensor |
| 11 |
Stainless Steel Condenser Tube for corrosive samples (Factory Option) |
| 12 |
ADManagerR Kit(communication software for Windows98/Me/2000, converters and cables) |
| 13 |
Automatic Fire Extinguisher System (CO2 Gas Bomb) |